| Item | Description |
| Basic function | Control Mode | VF control |
| Sensorless flux vector control(SVC) |
| Close-loop vector control(FVC)(Above 3.7kW) |
| Maximum frequency | 0~600Hz |
| Carrier frequency | 0.5kHZ——8kHz |
| The carrier frequency is automatically adjusted based on the load features |
| Input frequency resolution | Digital setting:0.01Hz |
| Analog setting: Maximum frequency x 0.025% |
| Start torque | G Type:0.5Hz/150%(SVC) |
| P Type:0.5Hz/100% |
| Speed range | 1:100 (SVC) |
| Speed stability accuracy | ±0.5%(SVC) |
| Overload capacity | G Type:60s for 150% of the rated current, 3s for 180% of the rated current. P Type:60s for 120% of the rated current, 3s for 150% of the rated current. |
| Torque boost | Auto-boost ; |
| Customized boost: 0.1%~30.0% |
| V/F Curve | Straight-line V/F curve |
| Multi-point V/F curve |
| N-power V/F curve (1.2-power, 1.4-power, 1.6-power, 1.8-power, square) |
| V/F separation | 2 types: complete separation; half separation |
| Ramp Mode | Straight-line ramp. |
| Four groups of acceleration/deceleration time with the range of 0.00`6500.0s |
| DC braking | DC braking frequency:0.00Hz~Maximum frequency |
| Braking time:0.0s~36.0s |
| Braking action current value:0.0%~100.0% |
| JOG control | JOG frequency range:0.00Hz~50.00Hz |
| JOG acceleration/deceleration time: 0.0s~6500.0s. |
| Simple PLC,Multiple preset speeds | It implements up to 16 speeds via the simple PLC function or combination of terminal states |
| Onboard PID | It realizes process-controlled closed loop control system easily |
| Auto voltage regulation(AVR) | It can keep constant output voltage automatically when the mains voltage |
| Overvoltage/overcurrent stall control | The current and voltage are limited automatically during the running process so as to avoid frequent tripping due to over voltage/over current |
| Rapid current limit | It helps to avoid frequent over current faults of the AC drive. |
| Torque limit and control | It can limit the torque automatically and prevent frequent over current tripping during the running process. Torque control can be |
| implemented in the FVC mode. |
| | Support for multiple PG card | Support for differential input PG card, resolver PG card ,rotating transformer PG card |
